1700w upgraded 45mm air cylinder hex tool holder demolition hammer

The G500 electric pick is a testament to the Aoli company's new design, development, and mass production. This oil pick took more than three years to develop.

To attract users with better innovation in such a fierce and competitive environment, we spent more than two years from project establishment to design. In the past two years, we have not only been working behind closed doors, but we have also visited many dealers, retailers, and direct users to listen to their voices. With awe for tools, we hope to build a very safe machine that everyone can be satisfied with.

After visiting the market, we found some problems with many brands on the market, and our technical team began to overcome them one by one.

1. Many machines on the market will have large electric picks with oil leakage in the gearbox during high-temperature and high-intensity use

2. In high-load and high-intensity use, the stator and rotor are prone to burn

3. Under high-intensity and high-load use, the cylinder is severely worn and the piston leather ring is also prone to wear

4. Under overload operation, the bearing inside the middle cover is easy to fall apart, causing the machine to not operate normally

Our company's technical team has improved all the problems in the market after working day and night:

1. For the gearbox part, a new design of cooling dimensions of each component is adopted. The temperature of each component is within a reasonable range during high-intensity operation. At the same time, it is reinforced with fully enclosed oil-proof imported Buddha glue materials, which solves the problem of oil leakage under overload operation

2. Given the problem that motors are prone to burnout under high-load work in the market, we have made comprehensive improvements and improvements. From the high-standard selection of raw materials to the concept of limiting production to quality, strictly implementing the daily production limit, and strictly controlling each process thoroughly and carefully, the problem of motor burning under high-load work has been solved.

3. Given the serious wear of the cylinder and the easy pull of the piston ring in the high-load and high-intensity work of the machines on the market, our technical team has made bold innovations and practices and adopted the double-leather ring technology rarely used in the market (which balances the air pressure and temperature in the cylinder very well) to solve the problems of cylinder wear and piston ring wear, and the life span has been increased several times so that users have a good experience.

4. In the case of overload operation in the market, the bearings in the gearbox are prone to fall apart. Our design team has made a new design and updated the configuration to effectively solve this problem.